- ON LINE - |
 |
- CATALOGUE - |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 Information & Sample Instruction Sheets |
 |
PROTOTYPE. 30 of these locomotives were built for the North British Railway by the Yorkshire Engine Co between 1911 & 1913. They remained practically unchanged throughout their lives and the whole class was taken over by BR. They were employed working branchline and secondary stopping passenger trains.
KIT. The body is mainly brass with a nickel silver chassis. A nice level of detail including cab interior is provided. A rear radial truck and adjustable side play on the front bogie allow this long loco to get around reasonably tight curves.
| Kit Reference Code CK - C15 |
Kit Price £310.00 Print Off Order Form pdf file |
- Additional Components Required to Complete -
- Motor and Gear Set -
I recommend my own 1833 motor and 40/1 gear set.
More Information About Motors
I recommend my own 1833 motor and 40/1 gear set.
More Information About Motors
- Wheels -
2 Sets 5'9", 18 spoke driving wheels (Slater's Catalogue Number 7869E),
2 Sets 3'6", 10 spoke bogie wheels (Slater's Catalogue Number 7842),
1 Set 3'9", 10 spoke trailing wheels (Slater's Catalogue Number 7845).
Slater’s Plastikard, Old Road, Darley Dale, Matlock, Derbyshire, DE4 2ER, Telephone 01629 734053, Fax 01629 732235.
More Information About Wheels
2 Sets 5'9", 18 spoke driving wheels (Slater's Catalogue Number 7869E),
2 Sets 3'6", 10 spoke bogie wheels (Slater's Catalogue Number 7842),
1 Set 3'9", 10 spoke trailing wheels (Slater's Catalogue Number 7845).
Slater’s Plastikard, Old Road, Darley Dale, Matlock, Derbyshire, DE4 2ER, Telephone 01629 734053, Fax 01629 732235.
More Information About Wheels
- Optional Plunger Electrical Pickups -
If these are desired as an alternative to the wire wiper pickups that are included in the kit. I would recommend the type produced by Slater's and provision is made in the kit chassis for fitting these (Slater's Cat No 7157).
More Information About Pickup Systems
If these are desired as an alternative to the wire wiper pickups that are included in the kit. I would recommend the type produced by Slater's and provision is made in the kit chassis for fitting these (Slater's Cat No 7157).
More Information About Pickup Systems
Approximate Cost of Completing The Model
Kit - £310 + Motor/Gears - £45 + Slaters Wheels - £121 = £476.00
Kit - £310 + Motor/Gears - £45 + Slaters Wheels - £121 = £476.00
- Download LNER C15 Instructions as PDF Print Off -
Downloading the instruction booklets will allow you to evaluate the kit and its construction and help you to determine its suitability for yourself and your project.
